Hydraulic Tablet Press
Rotary presses win on volume; hydraulic single-station presses win on control. I have seen teams buy a rotary for a 5,000-tablet clinical batch and spend more time on setup, cleaning validation and yield loss than the entire compression event would have taken on a hydraulic unit.
Related Products
A rotary press sets compression by the geometric profile of the compression roll cam — force is a function of fill depth and roll position. A hydraulic press sets force directly via a servo-controlled hydraulic cylinder: you command 12.0 kN and the system holds it within ±0.3 kN across the stroke, independent of small fill variations. This matters for:
Moisture-sensitive APIs where dwell time and peak pressure, not just average force, drive degradation.
Low-dose potent compounds where a 2% force swing changes content uniformity.
Bi-layer or pre-compressed tablets where the first layer must not exceed a set pressure.
| Set force (kN) | Actual force (kN) | Hardness (kp) | Friability (%) | Disintegration (min) |
|---|---|---|---|---|
| 8 | 7.9±0.2 | 4.1 | 0.9 | 6.2 |
| 12 | 12.0±0.3 | 6.8 | 0.3 | 5.4 |
| 16 | 16.1±0.3 | 9.5 | 0.1 | 4.8 |
| 20 | 20.2±0.4 | 11.2 (capping risk) | 0.1 | 4.5 |
The capping at 20 kN was repeatable within 0.4 kN — a precision a cam-driven press cannot deliver without re-machining the tooling.
Middle East, veterinary bolus: A Saudi feed-additive plant needed 2–4 kg batches of a 5 g bolus with 9.8 kN±0.5 force to avoid laminating a wax binder. A 50 kN hydraulic press at 40 tablets/min delivered the tolerance; a rotary would have over-produced by 200×.
EU, orphan-drug clinical supply: A French CDMO compressed 3,200 tablets of a 2 mg active with a 1.5% API load using a hydraulic press with a 6 kN soft-compaction profile, holding content uniformity within the 15% RSD acceptance.
GMP: hydraulic lines must log force, upper-punch position and reject count per batch (21 CFR 211.101, EU GMP Chap 4).
CE Machinery Directive 2006/42/EC: pressure-vessel and guarding rules apply to the hydraulic power unit.
ISO 9001 / ISO 13485: 13485 relevant where the press serves a device-tablet process; calibration of the load cell is a controlled document.
ATEX: required only if compressing solvent-wetted granules in a zoned area.
Hydraulic oil temperature drift changes force by up to 1.5% over a long run — unnoticed without a load cell in the loop.
Single-station speed (30–80 tablets/min) is mistaken for "slow and outdated" when it is actually "appropriate."
Buyers spec 50 kN "for headroom" and never use it, paying for a cylinder they don't need.
Choosing hydraulic for a 500 kg/day product — a rotary is cheaper per tablet at that volume.
Assuming hydraulic = manual; modern servo-hydraulic units auto-adjust force and reject out-of-tolerance tablets.
Forgetting the dwell-time parameter; force alone does not prevent capping if dwell is too short.
Manual lever presses (0–15 kN) suit formulation screening. Motorised hydraulic (15–100 kN) with a force-feedback loop suit clinical and low-volume. Mini-rotary (16-station) suits 20–100 kg/day. The break-even versus a rotary is roughly 150 kg/day of finished tablets.
Demand a load-cell force report, not a "max pressure" spec.
Confirm dwell-time adjustability (0.1–2.0 s); without it you cannot tune sensitive APIs.
Check the oil-cooling option for runs longer than 30 min.
Ask whether the PLC logs force per stroke to a CSV for batch record — most auditors now expect it.
Contact Us
Related Information!
Capsule Pill FillerAutomatic Capsule Filling MachineSoftgel Capsule MachineDouble Rotary Tablet Compression MachinePill Pack MachineTablet CompressionWet GranulatorBuy Capsule Filling MachineSoftgel Encapsulation MachineSingle Punch Tablet PressTablet Counting Machine PriceCapsule Machine AutomaticEncapsulator MachineTablet Packing MachineMedicine Packaging MachineAutomatic Capsule FillerTablet Press AustraliaPharma Machinery ManufacturersBlister Pack MachineCapsule Maker AustraliaSingle punch tablet machineSalt Tablet Press MachineGelatin Capsule MachineMedicine Tablet Making MachineSize 1 Capsule FillerEncapsulation MachineMachines Used in Tablet ManufacturingFluid Bed GranulationFluidized Bed DryingSoftgel Capsules MachinePill Filler MachineCapsule Making Machine UKMachine to Fill CapsulesRotary Tablet MachineCandy Press MachineCapsule Filling Machine PriceTablet Strip Packing MachinePress Machine for DrugsTablet Machine PriceCapsule Maker MachinePharma Equipment ManufacturersTablet Manufacturing MachineAll in Capsule Filling MachineRotary Tablet Compression MachineTablet making machine