Gel Capsule Filler
With hard-gelatin capsules, the filler is the easy part — the hard part is the gelatin shell, which is hygroscopic and brittle outside a 40–55% relative-humidity window. Most gel capsule filler "machine problems" I am called to fix are actually a humidity problem in the room, and no dosator precision survives a shell that cracks at the separator.
Related Products
Gelatin capsules equilibrate with ambient moisture. Below ~35% RH they become brittle and split at the cap-body junction during closing; above ~60% they soften, stick in the orienter, and double-feed. The shell's moisture content (typically 13–16%) is the control variable.
Orienter: needs shells at 40–55% RH or they jam (too dry = static; too wet = clumping).
Separator vacuum: dry shells need gentler vacuum; brittle caps shatter under standard suction.
Dosator: a dosator pin meters volume; it assumes stable bulk density, which only holds if the blend is conditioned too.
30% | 4.2% | 0.8% | 2.3% |
48% | 0.3% | 0.2% | 2.0% |
65% | 0.5% | 5.1% | 2.6% |
A Malaysian plant ran the same filler and same blend across a dry and a wet month; rejects moved from 0.3% to 4.2% purely on room humidity. A local humidifier/dehumidifier pair fixed it for a fraction of a new machine.
EU: EU GMP expects controlled environmental monitoring; shell humidity is a documented parameter.
Southeast Asia: tropical ambient routinely exceeds 65% RH — active dehumidification is not optional.
Middle East: desert air drops below 20% RH in dry season; humidification needed to stop cracking.
Static in dry rooms causes shells to cling and mis-seat.
Seasonal blend re-qualification: a winter setting fails in summer.
HPMC shells behave differently — do not assume gelatin parameters apply.
Buying a premium dosator filler while the room has no RH control — the shell defeats the precision.
Using gelatin settings on HPMC shells and vice-versa.
Ignoring shell storage; pallets left in a humid dock absorb moisture before they reach the line.
Target 40–55% RH and 20–25°C; monitor it as a critical environmental parameter, not a comfort setting.
Similar but not identical; HPMC is less brittle when dry yet more moisture-sensitive when wet — requalify.
Usually too dry; raise RH or condition shells in a humidified buffer before the orienter.
Mechanically yes; parametrically no without re-qualification of humidity and tamp settings.
Written by David Shi | Chief Industrial Application Engineer
David Shi is a Chief Industrial Application Engineer with 9 years of specialized experience in industrial drying system design, equipment selection, and production process optimization. He focuses on delivering tailored solutions for pharmaceutical, food, and chemical manufacturing, with proven expertise in GMP compliance, ISO 9001 standards, and large-scale production line integration.
Contact Us
Related Information!
Pressing TabletsDishwasher Tablet Making MachineEncapsulation EquipmentSingle Punch Tablet Press MachineCapsules Filling MachineEasy Snap Packaging MachineGel Capsule MachineTablet Capsule Machine LineMedical Capsule MachinePunch and Die Tablet PressFluidized Bed DryingCapsule Pill MachineCapsule Filling Machine Size 0Capsule Packing MmachineCapsule Filler Size 3Semi Automatic Capsule FillingCapsule Making Machine PriceCapsule Pill Filling MachineCapsule Filling DeviceBlister Packaging Machine Pharmaceutical IndustryPharma Tablet Manufacturing MachineSoft Gel Capsule Manufacturing MachineCapsule Machine for SalePill Pack MachineElectronic Tablet CounterTablet Making Machine PriceEncapsulator MachineBlister Packs for TabletsAutomatic Tablet Making MachineCounter Tablet MachineMachines Used in Pharmaceutical IndustrySemi Automatic Encapsulation MachineTablet MachinesSoftgel Capsules MachineTablet Counting Machine PriceTablet Manufacturing MachineBlister Packing MachineTablet Machine PriceSoft Gel Capsule MachineTablet Press for SaleEmpty Capsule Filling MachinePill Capsule MachineWet GranulatorCap Filling MachineRapid Pack Blister Packing Machine